Grave Cleaning & Headstone Restoration in Norfolk

Leveling Sinking Monuments and Cleaning Ship Exhaust in Norfolk

Norfolk is wet. It is built on water. Dig a hole in this city, and you hit groundwater almost immediately. That keeps the soil in Elmwood and Cedar Grove soft. Large monuments don't just sit on the grass; they slowly sink into the muck. We see headstones that have dropped inches deep, hiding the dates and names under the turf.

The air here is also hard on stone. We have salt from the water and heavy diesel exhaust from the port and naval base. This mix settles on the headstones. It isn't just dry dust; it is a greasy, salty film. It eats into bronze plaques, turning them green. It bonds to granite, creating a dark haze that rain won't wash away. Families searching for headstone cleaning services near me call us to lift their sinking markers and to strip this heavy industrial grime off the stone.

Leveling Stones in Tidal Mud

The mud here is like soup. It cannot support heavy weight. Shoving more dirt under a leaning stone is a waste of time. The dirt just turns to mud and the stone sinks right back down.

We build a solid pad. We hoist the monument. We dig out the soft, wet mud. We replace it with a deep layer of crushed, angular gravel. We pack it tight. The gravel creates a drain. Water flows through it instead of turning it into mud. We reset the stone on this rock base. It stays level because the rock doesn't soften when the tide comes up.

Removing Ship Exhaust and Soot

The black grime on Norfolk stones is oily. It comes from ship engines and truck traffic. It sticks to the stone and hardens. Scrubbing with dish soap usually does nothing.

We use a commercial degreaser. We spray it on the stone to cut through the oil. We let it work. We scrub the stone hard. The black sludge breaks loose, and you can see it running down the face of the marker. We rinse it thoroughly until the granite is clean.

Killing Black Algae on Marble

The humidity here feeds black algae. It thrives on the old white marble markers in Forest Lawn. It creates a solid black stain that covers the name and dates.

We clean this without pressure washing. High pressure destroys old marble. We use a biocide. We apply it to the stone to kill the algae roots. The black stain turns brown and washes away. The stone becomes white again without losing any of the inscription.

Restoring Salt-Damaged Bronze

The salt air eats the clear coat right off the bronze markers. Once that seal is gone, the metal corrodes fast, turning a crusty green.

We restore them in the field. We strip the corrosion down to bare metal. We sand the highlights to make the lettering pop. We heat the bronze to remove moisture. We apply a new marine-grade clear coat. It seals the metal against the salt air and keeps it looking new.

Consolidating Sugaring Stone

The oldest stones in Norfolk are melting. The salt air dissolves the binder in the marble. The surface turns to powder (sugaring).

We stop the decay. We apply a stone consolidator. This fluid soaks into the crumbling stone and hardens. It locks the grains together. The stone becomes solid again, preserving the history before it washes away.

Repairing Mower Scuffs

Mowers run tight to the stones. They hit the corners. We see black rubber marks and chipped granite edges.

We clean the rubber marks with a solvent. For chips, we use diamond files. We grind the sharp, broken edge into a smooth bevel. It looks finished and prevents the mower from catching that same jagged spot again.

Service Costs in Norfolk

We don't need to visit the cemetery to give you a price. We have fixed, transparent pricing for all our services, including leveling and industrial cleaning. Check our subscription builder to see the exact cost for your plot.